Hobart ML-29191 Scale User Manual


 
Quantum Scale System
General Information 2 - 14
Removing the Scale Platter
To remove the Scale Platter:
1. Lift up on the front lip of the platter.
2. Pull it straight up to remove.
Installing the Scale Platter
To install the Scale Platter:
1. Locate the Platter Locating Studs on the bottom of the
platter.
2. Rotate the platter in your hands until the Platter
Locating Studs are positioned in the upper right-hand
and lower left-hand corners.
3. Line up the Studs with the hole in the center of the
Rubber Platter Mounts on the sub-platter.
4. Gently press the platter into place to make sure that it
seats.