Filter
Top Products
Quantum Scale System
Weigh Types (Modes of Operation) 6 - 2
Weigh Types
The following section provides a look at the procedures for
successfully weighing items and printing labels within each
specific Weigh Type (mode of operation). These include:
♦ Wait on a Customer
♦ PrePackaged Products
♦ Print Multiple Labels
♦ Production Entry
♦ Accumulate Items
♦ Verify Fixed Weight
Wait on a Customer
Mode
Wait on a Customer is the mode you will use most often. It
allows you to simply weigh a product and print a label, or
to just print a label for a by count or fixed weight item.
Examples are service counters, such as -- produce, deli, fish
counter or service meats. The following details how to
weigh and print a label based on the PLU type.
Processing Random Weight
PLU’s
For Random Weight PLU’s:
1. Enter your Operator ID (if required).
2. Enter the PLU number (Select Flashkey, Type PLU
number or select from the On Screen Library).
3. Place the product on the platter for weighing.
4. PRESS [PRINT] to print a label. When you remove the
product, it will automatically return to the Flashkey
Screen if configured, to the Start a Run Screen if
Operator IDs are required, or it clears the PLU field and
remains on the Run Screen.
☛ Note
Canadian Mode Only
If you are operating this scale in the Canadian Mode,
Random Weight PLU’s will be processed a little differently
than the above description.
If you enter a PLU Number (with or without weight on the
platter), you cannot clear that PLU from the system unless
you print a label or remove the weight (product) from the
scale platter. If you are using Flashkeys, the same applies
except that the scale returns to the Flashkey Screen when it
clears.