Hobart ML-29191 Scale User Manual


 
Quantum Scale System
6 - 17 Weigh Types (Modes of Operation)
Forced By Count
For PLU’s that require a by count quantity, the PLU can be
set up to require you to enter a by count quantity. This
feature might be used if customers want a product in
different quantities. By using the Forced By Count option,
only one PLU Number is required.
QUICK STEPS
From the Start a Run Screen:
1. Enter your Operator ID
2. Enter a PLU Number
3. PRESS [ENTER]
4. Type By Count Quantity
5. PRESS [ENTER]
6. Place package on scale
7. Place label on package
8. PRESS [ESC]
1. Enter your Operator ID (if required).
2. Enter the PLU Number (Select Flashkey, Type PLU
number or select from the On Screen Library). You are
now on the Run Screen.
3. PRESS [ENTER] or [DOWN ARROW ()]. There is an
audible beep and the cursor moves to the Forced By
Count field. You cannot do anything else until you enter
a valid By Count quantity.
4. TYPE the By Count quantity.
5. PRESS [ENTER] or [DOWN ARROW ()]. The cursor
then moves to the next active field, Product Number.
6. To complete the transaction, follow the steps for printing
a label based on your mode of operation.
Platter Tare
During the initial scale set-up, the scale may be configured
for Platter Tare. This simply means that you can enter the
Tare value by placing the “container” on the platter (when
the cursor is on the Tare field) and pressing Enter or Down
Arrow to accept the weight value.
The following explains how you enter the Platter Tare value.