Filter
Top Products
Quantum Scale System
3 - 3 Start-Up Procedures
✎ Tip
If you had weight on the scale platter during the Power-up
Sequence:
1. Remove the object from the scale platter.
2. PRESS [REZERO] to rezero the scale. After a short
delay, Zero Weight should display 0.00 lb.
3. In the event the scale does not rezero, PRESS [ESC].
4. Then, PRESS [POWER] to turn the scale OFF.
5. PRESS [POWER] again to turn the scale ON.
6. If the scale still doesn’t rezero, PRESS the [RESET
BUTTON], located on the left side of the scale, to reset
the scale.