Filter
Top Products
Quantum Scale System
General Information 2 - 10
Loading Standard or Narrow
Die-Cut Labels
To load die-cut labels into the scale:
1. Remove the labels from the first ten (10) inches of the
label roll.
2. Place the roll of labels on the Hub in the Label Cassette.
3. Thread the Leader between the Peel Bar and the Cassette
Housing.
4. Wrap the Leader around the Take-Up Spool.
5. Slide the Take-Up Key onto the Take-Up Spool, making
sure that it is on the outside of the leader.
6. Turn the Take-Up Spool counterclockwise to remove
any slack in the label stock liner.
7. Replace the Label Cassette.