Filter
Top Products
Quantum Scale System
Weigh Types (Modes of Operation) 6 - 16
Forced Tare
For PLU’s that require a tare value, the PLU can be set up to
require you to enter a tare value. This feature might be used
in a deli case where a customer may want Potato Salad and
you have different size containers (i.e., 1/4 lb., 1/2 lb., etc.)
and they all weigh differently. By using the Forced Tare
option, only one PLU Number is required.
QUICK STEPS
From the Start a Run Screen:
1. Enter your Operator ID
4. Enter a PLU Number
5. PRESS [ENTER]
6. Type a Tare value
7. PRESS [ENTER].
5. Place package on scale
6. Place label on package
7. PRESS [ESC]
1. Enter your Operator ID (if required).
2. Enter the PLU Number (Select Flashkey, Type PLU
number or select from the On Screen Library). You are
now on the Run Screen.
3. PRESS [ENTER] or [DOWN ARROW (▼)]. There is an
audible beep and the cursor moves to the Tare field. You
cannot do anything else until you enter a valid Tare
value.
4. TYPE the Tare value.
5. PRESS [ENTER] or [DOWN ARROW (▼)]. The cursor
then moves to the next active field, Product Number.
6. To complete the transaction, follow the steps for printing
a label based on your mode of operation.
✎ Tip
A PLU can be set up to require Forced Price and Forced
Tare. In the event this is the case, you will enter the Forced
Price first, followed by Forced Tare.