Filter
Top Products
Quantum Scale System
3 - 5 Start-Up Procedures
Checking Date & Time
QUICK STEPS
From the Start a Run Screen:
1. PRESS [F1]
2. Verify Date & Time is
accurate.
3. PRESS [ESC]
To check Date & Time to see that they are correct:
1. From the Start a Run Screen, PRESS [F1].
2. Verify the Date/Time is accurate.
3. PRESS [ESC] to return to the Start a Run Screen.
Changing Date & Time
QUICK STEPS
From the Start a Run Screen:
1. PRESS [F1]
2. TYPE the Current Date
3. PRESS [ENTER] or [▼]
4. TYPE the Current Time.
5. PRESS [F1] - If Needed
6. PRESS [ESC]
To change the Date & Time in the event that it is incorrect:
1. From the Start a Run Screen, PRESS [F1].
2. TYPE the current Date as a six-digit number
(MM/DD/YY).
3. PRESS [ENTER] or [DOWN ARROW (▼)] to move the
cursor to the Time field.
4. TYPE the current Time. Enter the Time as a four-digit
number (HH:MM).
5. If you need to change AM or PM, PRESS [F1] to select
the correct time of day.
6. When the Date and Time is correct, PRESS [ESC] to save
the changes and return to the Start a Run Screen.