Filter
Top Products
Quantum Scale System
4 - 7 Start a Run Screen
Totals Types
All Totals Types, except Production, are created by the
Supervisor and allow reporting of totals information. As an
example, you could keep track of items on sale this week.
The list below provides you a list of additional examples for
Totals Types you may want to track.
♦ Production (See Note)
♦ Ad Items *
♦ Manager’s Specials *
♦ Coupon Items *
Use the ARROW Keys to move the cursor to the appropriate
Totals Type.
☛ Note
Production Totals are a permanent part of the scale system
(i.e., this Totals Type cannot be deleted). In contrast, the
Totals Types marked with an asterisk are examples only.
Your supervisor can designate in Configure Totals Types all
the Totals Types required for your operation.
Selecting Weigh and
Totals Types
Once you’ve determined the Weigh and Totals Types you
want to use:
1. PRESS the [UP ARROW (▲)] or [DOWN ARROW (▼)]
key to move the cursor up and/or down the list of
Weigh or Totals Types to select your choice.
2. PRESS the [RIGHT ARROW (
)] key to move the cursor
to the Totals Type column. Pressing the [LEFT ARROW
(
)] key will move you back to the Weigh Type column.
3. PRESS [ENTER] to select the Weigh and Totals Type
required for your operation.
4. You are now at the Flashkey Screen or the Run Screen.
☛ Note
If your system is set-up with Flashkeys, when you select a
specific Weigh or Totals Type, the scale will send you to the
scale’s home position Flashkey screen.