Filter
Top Products
Reference Manual
00809-0200-4101, Rev AA
July 2008
Rosemount 2051
www.rosemount.com
Section 1 Introduction
USING THIS MANUAL The sections in this manual provide information on installing, operating, and
maintaining Rosemount 2051 pressure transmitters with F
OUNDATION fieldbus.
The sections are organized as follows:
• Section 2: Installation contains mechanical and electrical installation
instructions.
• Section 3: Configuration provides instruction on basic operation,
software functionality, and basic configuration procedures.
• Section 4: Operation and Maintenance contains operation and
maintenance techniques.
• Section 5: Troubleshooting contains information on the
troubleshooting suggestions for the most common operating problems.
Also included are disassembly and reassembly procedures.
• Section A: Reference Data supplies reference and specification data,
as well as ordering information.
• Section B: Approval Information contains intrinsic safety approval
information, European ATEX directive information, and
approval drawings.
• Section C: Block Information contains information on the Transducer
and Resource blocks.
SERVICE SUPPORT To expedite the return process outside of the United States, contact the
nearest Emerson Process Management representative.
Within the United States, call the Emerson Process Management Instrument
and Valves Response Center using the 1-800-654-RSMT (7768) toll-free
number. This center, available 24 hours a day, will assist you with any needed
information or materials.
The center will ask for product model and serial numbers, and will provide a
Return Material Authorization (RMA) number. The center will also ask for the
process material to which the product was last exposed.
Emerson Process Management Instrument and Valves Response Center
representatives will explain the additional information and procedures
necessary to return goods exposed to hazardous substances.
Individuals who handle products exposed to a hazardous substance can avoid injury if they
are informed of and understand the hazard. If the product being returned was exposed to a
hazardous substance as defined by OSHA, a copy of the required Material Safety Data Sheet
(MSDS) for each hazardous substance identified must be included with the returned goods.