Filter
Top Products
Reference Manual
00809-0200-4101, Rev AA
July 2008
C-13
Rosemount 2051
Symptom Possible Causes Corrective Action
Mode will not leave
OOS
Target mode not set. Set target mode to something other than
OOS.
Memory Failure BLOCK_ERR will show the memory failure.
Check RESTART vallue. Restart the device
by setting RESTART to Processor. If the
block error does not clear, call the factory.
Block Alarms Will
not work
Features FEATURES_SEL does not have Reports
enabled. Enable the Reports bit.
Notification LIM_NOTIFY is not high enough. Set equal
to MAX_NOTIFY.