Filter
Top Products
Reference Manual
00809-0200-4101, Rev AA
July 2008
C-3
Rosemount 2051
PRIMARY_VALUE_RANGE 15 The high and low range limit values, the engineering unit code, and the number of
digits to the right of the decimal point to be used to display the final value.
Valid engineering units are the following:
1130 = Pa
1133 = kPa
1137 = bar
1138 = mbar
1139 = torr
1140 = atm
1141 = psi
1144 = g/cm
2
1145 = kg/cm
2
1148 = inH
2
O @ 68 °F
1151 = mmH
2
O @ 68 °F
1154 = ftH
2
O @ 68 °F
1156 = inHg @ 0 °C
1158 = mmHg @ 0 °C
PRIMARY_VALUE_TYPE 13 Type of measurement represented by the primary value.
107 = Differential pressure
108 = Gage pressure
109 = Absolute pressure
SECONDARY_VALUE 29 The secondary value, related to the sensor.
SECONDARY_VALUE_UNIT 30 Engineering units to be used with SECONDARY_VALUE.
1001 °C
1002 °F
SENSOR_CAL_DATE 25 The last date on which the calibration was performed.This is intended to reflect the
calibration of that part of the sensor that is usually wetted by the process.
SENSOR_CAL_LOC 24 The last location of the sensor calibration. This describes the physical location at
which the calibration was performed.
SENSOR_CAL_METHOD 23 The last method used to calibrate the device.
103 = factory trim standard
104 = user trim standard
SENSOR_CAL_TYPE 35 The type of last sensor calibration.
0 = Differential pressure
1 = Gage pressures
2 = Absolute pressure
252 = Unknown
SENSOR_CAL_WHO 26 The name of the person responsible for the last sensor calibration.
SENSOR_FILL_FLUID 28 Type of fill fluid used in sensor.
0 = Undefined
1 = Silicone
2 = Inert
3 = Undefined
7 - Neobee
251 = "None"
252 = "Unknown"
253 = "Special"
SENSOR_ISOLATOR_MTL 27 Defines the construction material for the isolating diaphragms.
2 = 316 Stainless Steel
3 = Hastelloy C
™
4 = Monel
5 = Tantalum
253 = "Special"
SENSOR_RANGE 21 The high and low range limit values, the engineering units code, and the number of
digits to the right of the decimal point for the sensor.
SENSOR_SN 22 Serial number of the sensor.
Parameter
Index
Number
Description