Filter
Top Products
Reference Manual
00809-0200-4101, Rev AA
July 2008
Rosemount 2051
2-20
LCD Display Transmitters ordered with the LCD option are shipped with the display
installed. Installing the display on an existing 2051 transmitter requires a small
instrument screwdriver.
Figure 2-11. LCD Display
.
Tagging Commissioning (Paper) Tag
When commissioning more than one device on a fieldbus segment, it can be
difficult to identify which device is at a particular location. A removable tag
provided with the transmitter can aid in this process by linking the Device ID
and a physical location. TheDevice ID is a unique code that identifies a
particular device in the absence of a device tag. The device tag is used by the
customer as an operational identification for the device and is usually defined
by the Piping and Instrumentation Diagram (P & ID).
The installer should note the physical location in both places on the
removable commissioning tag and tear off the bottom portion. This should be
done for each device on the segment. The bottom portion of the tags can be
used for commissioning the segment in the control system, providing a direct
link between the Device ID and the tag location.
Jumpers (Top and Bottom)
LCD Display
Extended
Cover
COMMISSIONING TAG
Device ID:
0011512051010001440-121698091725
PD Tag:
Device ID:
0011512051010001440-121698091725
PD Tag:
Tear Here