Filter
Top Products
Using MediCal Pro 89
2 Barco flat panel displays are added immediately. For all other display
types, the Display Connection Setup dialog appears.
a) Select the USB tab if you want to add a Barco display (flat panel or
CRT) connected to the USB bus.
• From the drop-down list, select the serial number of the display
connected to this head.
•Click on Identify to see which display is connected to which head.
For a few seconds, you will see the letter of the heads on the displays.
They automatically disappear after a few seconds.
•Click on Show display to see which display corresponds to the serial
number chosen from the drop-down list.
The image of the selected display will blink for a few times.
b) Select the Serial port tab if you want to add a Barco CRT display
connected to the serial (Remote) bus.