Filter
Top Products
Introduction 15
• If an optical sensor has been used for executing a certain task, the last
used sensor is depicted in the Configuration section.
• You can perform a number of actions to the displays when they are
listed in the Configuration section. Therefore, click with the right
mouse button on the icon of the display you want to perform an
action to. A menu with possible actions will pop up.
The menu contains the following items:
Properties
Show the display and imaging board head
properties and activate / deactivate some of
the display’s features.
In case of a sensor, show the sensor properties.
Add Display
Add a display icon to the configuration. This
action does not use the Configuration Setup
Wizard, but allows you to directly add a Barco
or non-Barco display.