Filter
Top Products
First installation 56
Black target setup on color displays
Measure on next calibration (Luminance)
Select this option if you do not wish to enter a target value now. Instead,
the target value will be determined by measuring during the next
calibration.
Absolute value (Luminance)
Select this option if you wish to enter a numeric target value.
This option is preferred for Barco displays.
Luminance
In this field, enter the required target value.
The field will be grayed if the “Measure on next calibration” option is
selected.
Measure on next calibration (Chroma - color displays only)
Select this option if you do not wish to enter a target value now. Instead,
the target value will be determined by measuring during the next
calibration.
Select this option if you wish to use the native LCD panel black chroma as
chroma setting for black.
Same as white chroma (Chroma - color displays only)
Select this option in case you wish the black and white chroma values to
be the same.