Call Functions 39
–
Noise suppression on/off
: allows you to turn on the Noise Suppression
feature when you are in a noisy area. Turn it Off when not needed to
conserve battery power.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have a
call in progress if your network supports this service.
1. While on a call, tap Hold . This action places the
current caller on hold.
2. To reactivate this call, tap Unhold.
To make a new call while you have a call in progress
1. Tap Hold .
2. Tap
Add call
to display the dialer.
3. Enter the new number and tap .
Once connected, the active call will appear in a large box in
the middle of your screen and the call on hold will appear in
a small box in the upper right corner of your screen.
Switching Between Calls
When you have an active call and a call on hold, you can switch
between the two calls, changing the one on hold to active and
placing the other on hold.
1. Tap Swap.
The current call (caller #2) is placed on hold and the
previous call on hold (caller #1) is then reactivated so that
you can continue conversing with that person. The active
call will appear in a green box.
2. Tap to end the currently active call.
To end a specific call
1. Tap
Swap
until the call you want to end appears in a green
box.
2. Tap to end the specific call.
3. Tap to end the remaining call.
To answer a call while you have a call in progress
1. Tap and slide to the right to answer another call.
The first call is automatically put on hold.
2. To switch between the two calls, tap Swap.
