Filter
Top Products
ViewStation EX, ViewStation FX, and VS4000 API Guide
© Polycom, Inc. 2003 67
gatewayprefix <set|get><"valid speed">
["value"]
gatewayprefix set <"valid speed"> ["value"]
gatewayprefix set <"valid speed">
gatewayprefix get <"valid speed">
Description
This command sets the gateway prefixes for the corresponding
speeds. Some gateways require a number to be prepended (prefix)
to the gateway number. The prefix identifies which gateway is used
to dial a call at a particular data rate.
set <“valid speed”>
Sets the gateway prefix when followed by the value
parameter. If you want to erase the current setting, omit
value.
valid speedValid speeds are: 56, 64, 2x56, 112, 2x64, 128, 168,
192, 224, 256, 280, 320, 336, 384, 392, 7x64, 8x56,
504, 512, 560, 576, 616, 640, 672, 704, 728, 768, 784,
832, 840, 16x56, 14x64, 952, 960, 1008, 1024, 1064,
1088, 1120, 1152, 1176, 1216, 1232, 1280, 1288,
24x56, 21x64, 1400, 1408, 1456, 1472, 1512, 1536,
1568, 1600, 1624, 1664, 1680, 1728, 1736, 32x56,
28x64, 1848, 1856, 1904, and 1920 Kbps.
value Prefix (code) used for a particular call speed. Consult
your gateway instruction manual to determine which
codes are appropriate.
get <“valid speed”>
Displays the current value for this speed.
Note 1 Use quotation marks around a compound name or strings
containing spaces (Ex: “united states” or “111 222 333”).
Note 2 The ViewStation EX system supports speeds up to 768
Kbps.
gatewayprefix