Filter
Top Products
ViewStation EX, ViewStation FX, and VS4000 API Guide
204 www.polycom.com
v35dialingprotocol <rs366|get>
Description
This command selects the V.35/RS-449/RS-530/RS-366 dialing
protocol. Selecting a dialing protocol is not needed if you are using
your DCE to dial the call or if you have a dedicated connection to the
far site.
rs366 Enables RS-366 as the dialing protocol. At this time,
RS-366 is the only supported dialing protocol on the
system.
get Displays the current setting.
Example
v35dialingprotocol rs366
User Interface Screen Location
System Info>Admin Setup>Video Network>Video Network: Dialing
Protocol
This screen is only accessible if you have a V.35/RS-449/RS-530/
RS-366 network interface connected to your system.
v35num <set|get> <1b1|1b2> ["v35 number"]
v35num set <1b1|1b2> ["v35 number"]
v35num set <1b1|1b2>
v35num get <1b1|1b2>
Description
This command sets the ISDN video numbers assigned to the
system. The 1b1 and 1b2 parameters follow the convention and
v35dialingprotocol
v35num