Filter
Top Products
ViewStation EX, ViewStation FX, and VS4000 API Guide
© Polycom, Inc. 2003 107
muteautoanswercalls <yes|no|get>
Description
This command sets the system to Mute Auto Answer Calls mode.
When this option is selected, the microphone pod is turned off to
prevent the far site from hearing the near site when the system is in
Auto Answer mode.
yes Enables Mute Auto Answer Calls mode. The
microphone will be muted when the system receives a
call while in Auto Answer mode.
no Disables Mute Auto Answer Calls mode. The
microphone will not be muted when the system receives
a call while in Auto Answer mode.
get Displays the current setting (yes or no).
Example
muteautoanswercalls yes
User Interface Screen Location
System Info>User Setup: Mute Auto Answer Calls
nearloop <on|off>
Description
This command turns the Near End Loop on or off. When it is on, you
can test the encoder/decoder on your system. This can help you
diagnose a problem with an ISDN (H.320) video call. If you perform
a near-end loop test during a call, the far site sees a loop of itself.
on Turns the Near End Loop on. It provides a complete
internal test of the system.
muteautoanswercalls
nearloop