Filter
Top Products
ViewStation EX, ViewStation FX, and VS4000 API Guide
© Polycom, Inc. 2003 159
usegatekeeper <off|specify|auto|get>
Description
This command selects the gatekeeper mode (off, specify or auto).
After a change, the user is prompted for system restart.
Note A gatekeeper is not required to make IP-to-IP LAN calls. In
these situations, select the off option.
off Select this option if no gatekeeper is required or if you
make IP-to-IP LAN calls.
specify Specifies a gatekeeper. If this option is selected you
need to enter the gatekeeper IP address or name with
the command gatekeeperip (see page 61).
auto Sets the system to automatically find an available
Gatekeeper.
get Displays the current setting (off, specify, or auto).
Example
usegatekeeper specify
User Interface Screen Location
System Info>Admin Setup>LAN/H.323>H.323>Gatekeeper: Use
Gatekeeper
usegatekeeper