Filter
Top Products
ViewStation EX, ViewStation FX, and VS4000 API Guide
© Polycom, Inc. 2003 53
Description
This command is used to configure DNS servers (up to 4 DNS
servers can be configured). After a change is made, the system
prompts the user for restart.
Note This option can only be set when DHCP is off.
set <{1..4}> Sets a DNS server when followed by the parameter
xxx.xxx.xxx.xxx. If you want to erase the current
setting, omit the parameter.
get <{1..4}> Displays the current IP address of the specified
server (1..4).
1..4 Range of selectable servers.
xxx.xxx.xxx.xxxServer IP address.
Examples
dns set 1 192.168.1.111
dns get 4
User Interface Screen Location
System Info>Admin Setup>LAN/H.323>LAN/Intranet>
LAN & Intranet: DNS Servers
dynamicbandwidth <yes|no|get>
Description
This command is used to specify use of dynamic bandwidth
allocation for Quality of Service. The systems’ dynamic bandwidth
function automatically finds the optimum line speed for a call. If you
experience excessive packet loss while in a call, the dynamic
bandwidth function decrements the line speed until there is no
packet loss.This is supported in calls with endpoints that also
support dynamic bandwidth.
yes Enables the option.
dynamicbandwidth