Filter
Top Products
ViewStation EX, ViewStation FX, and VS4000 API Guide
© Polycom, Inc. 2003 37
Example
cameradirection normal
User Interface Screen Location
System Info>Admin Setup>Video/Camera>Cameras: Camera
Direction
camerainput <1|2|3|4> <off|s-video|
composite|get>
camerainput 1 <off|s-video|composite|get>
camerainput 2 <off|s-video|composite|get>
camerainput 3 <off|composite|get>
camerainput 4 <off|s-video|composite|get>
Description
This command sets video inputs on cameras 1-4 for the VS4000
system only. You can connect four cameras to your VS4000 system.
Note See the commands camera1ptz on page 35 and
camera4ptz on page 36 to set the VS4000 system’s
camera source 1 and 4 to pan-tilt-zoom mode.
1|2|3|4 Selects the camera source.
off Disables the selected camera source.
s-video Enables S-video inputs on the selected camera source.
Note that you can only set three cameras (1, 2, and 4)
to S-video.
composite Enables composite inputs on the selected camera
source.
get Displays the current camera input status for the
selected camera source.
camerainput