Mitsubishi Electronics MR-MC240 Sleep Apnea Machine User Manual


 
12 - 14
12. MONITOR NUMBER
12.6 Servo parameter information
Monitor No. Content Units Remarks
0500
Reserved
:
050F
0510
Servo parameter error number (Note)
No. 1100 to 110F
Bit corresponding to parameter number is turned on.
bit is No. 1100 (bit 0) to 110F (bit 15).
0511
Servo parameter error number (Note)
No. 1110 to 111F
Bit corresponding to parameter number is turned on.
bit is No. 1110 (bit 0) to 111F (bit 15).
0512
Servo parameter error number (Note)
No. 1120 to 112F
Bit corresponding to parameter number is turned on.
bit is No. 1120 (bit 0) to 112F (bit 15).
0513
Servo parameter error number (Note)
No. 1130 to 113F
Bit corresponding to parameter number is turned on.
bit is No. 1130 (bit 0) to 113F (bit 15).
0514
Servo parameter error number (Note)
No. 1140 to 114F
Bit corresponding to parameter number is turned on.
bit is No. 1140 (bit 0) to 114F (bit 15).
0515
Servo parameter error number (Note)
No. 1150 to 115F
Bit corresponding to parameter number is turned on.
bit is No. 1150 (bit 0) to 115F (bit 15).
0516
Servo parameter error number (Note)
No. 1160 to 116F
Bit corresponding to parameter number is turned on.
bit is No. 1160 (bit 0) to 116F (bit 15).
0517
Servo parameter error number (Note)
No. 1170 to 117F
Bit corresponding to parameter number is turned on.
bit is No. 1170 (bit 0) to 117F (bit 15).
0518
Servo parameter error number (Note)
No. 1180 to 118F
Bit corresponding to parameter number is turned on.
bit is No. 1180 (bit 0) to 118F (bit 15).
0519
Servo parameter error number (Note)
No. 1190 to 119F
Bit corresponding to parameter number is turned on.
bit is No. 1190 (bit 0) to 119F (bit 15).
051A
Servo parameter error number (Note)
No. 11A0 to 11AF
Bit corresponding to parameter number is turned on.
bit is No. 11A0 (bit 0) to 11AF (bit 15).
051B
Servo parameter error number (Note)
No. 11B0 to 11BF
Bit corresponding to parameter number is turned on.
bit is No. 11B0 (bit 0) to 11BF (bit 15).
051C
Servo parameter error number (Note)
No. 11C0 to 11CF
Bit corresponding to parameter number is turned on.
bit is No. 11C0 (bit 0) to 11CF (bit 15).
051D
Servo parameter error number (Note)
No. 11D0 to 11DF
Bit corresponding to parameter number is turned on.
bit is No. 11D0 (bit 0) to 11DF (bit 15).
051E
Servo parameter error number (Note)
No. 11E0 to 11EF
Bit corresponding to parameter number is turned on.
bit is No. 11E0 (bit 0) to 11EF (bit 15).
051F
Servo parameter error number (Note)
No. 11F0 to 11FF
Bit corresponding to parameter number is turned on.
bit is No. 11F0 (bit 0) to 11FF (bit 15).
Note. Information concerning parameter error (servo alarm 37) that has occurred at system startup can be monitored. If a parameter
warning (servo alarm E4) occurs while system is running, it is not reflected in this information.