Mitsubishi Electronics MR-MC240 Sleep Apnea Machine User Manual


 
12 - 13
12. MONITOR NUMBER
Monitor No. Content Units Remarks
0480
Information concerning axis that is
not mounted 1
(For driver)
When system error E400: "An axis that has not been
mounted exists" is set, this bit is turned on.
Axis 1 (bit 0) to axis 16 (bit 15)
0481
Information concerning axis that is
not mounted 2
(For driver)
When system error E400: "An axis that has not been
mounted exists" is set, this bit is turned on.
Axis 17 (bit 0) to axis 32 (bit 15)
0482
Reserved
0483
0484
Type code erroneous axis
information 1
(For driver)
When system error E405: Driver type code error is set, this bit
is turned on.
Axis 1 (bit 0) to axis 16 (bit 15)
0485
Type code erroneous axis
information 2
(For driver)
When system error E405: Driver type code error is set, this bit
is turned on.
Axis 17 (bit 0) to axis 32 (bit 15)
0486
Reserved
0487
0488
Electronic gear setting error axis
information 1
When an electronic gear setting error (system error E500) is
set, this bit is turned on.
Axis 1 (bit 0) to axis 16 (bit 15)
0489
Electronic gear setting error axis
information 2
When an electronic gear setting error (system error E500) is
set, this bit is turned on.
Axis 17 (bit 0) axis 32 (bit 15)
048A
Reserved
:
04FF