Mitsubishi Electronics MR-MC240 Sleep Apnea Machine User Manual


 
6 - 109
6. APPLICATION FUNCTIONS
Parameter
No.
Abbreviation Name
Initial
value
Units
Setting
range
Function
02B4 MKNL1 Latch data range
lower limit 1
(lower)
0000h 0000h
to
FFFFh
Specify the range (lower limit) of data to be latched at detection
of the mark detection signal of mark detection signal number
specification 1. (Note1), (Note 2)
02B5 MKNH1 Latch data range
lower limit 1
(upper)
0000h 0000h
to
FFFFh
02B6 MKXL1 Latch data range
upper limit 1
(lower)
0000h 0000h
to
FFFFh
Specify the range (upper limit) of data to be latched at detection
of the mark detection signal of mark detection signal number
specification 1. (Note1), (Note 2)
02B7 MKXH1 Latch data range
upper limit 1
(upper)
0000h 0000h
to
FFFFh
02B8 MKNL2 Latch data range
lower limit 2
(lower)
0000h 0000h
to
FFFFh
Same as latch data range lower limit 1.
02B9 MKNH2 Latch data range
lower limit 2
(upper)
0000h 0000h
to
FFFFh
02BA MKXL2 Latch data range
upper limit 2
(lower)
0000h 0000h
to
FFFFh
Same as latch data range upper limit 1.
02BB MKXH2 Latch data range
upper limit 2
(upper)
0000h 0000h
to
FFFFh
Note 1. When changed while system is running, changes are enabled when a mark detection settings enable command is input.
2. The set units are regarded as command units, or pulse units (the unit set in mark detection data type (parameter No.02B1)).
API LIBRARY
• Use the sscChange2Parameter/sscCheck2Parameter functions to set/get
mark detection.