Filter
Top Products
6 - 130
6. APPLICATION FUNCTIONS
(4) System status bit
Address Bit Symbol Signal name
0450 0 ITO Outputting with factor of interrupt
1 IITO
During interface mode interrupt
invalid
2
Reserved
3 HRIF During highly response I/F valid
4 BMA
During system program memory
access
5 PRINF
Continuous operation to torque
control compatible information
6
Reserved
7 IFMO
In interface mode
(a) Details on system status bits
Abbreviation Signal name Function details
PRINF Continuous operation to
torque control
compatible information
[Function]
Notifies that continuous operation to torque control is compatible.
[Operation]
<Conditions for turning on>
Continuous operation to torque control is compatible.
<Conditions for turning off>
Continuous operation to torque control is not compatible.
API LIBRARY
• To check if the following system status bits are ON/OFF, set the status bit
numbers of the sscGetStatusBitSignalEx function or
sscWaitStatusBitSignalEx function to the following.
• Continuous operation to torque control compatible information (PRINF):
SSC_STSBIT_AX_PRINF