Filter
Top Products
7 - 48
7. AUXILIARY FUNCTION
Setting No. Name Initial value Setting range Remarks
0010 Sampling trigger 1
setting
00000000h 00000000h
to 10041F01h
Trigger 1 sampling items
Selects the sampling items
referred by trigger 1.
0: Sampling data
1: Sampling bit information
0000000
The following settings differ up to Trigger 1 sampling items.
When Sampling data is selected
Trigger 1 sampling data number
Set the sampling data number
referred by trigger 1 in
hexadecimal.
Example: 00h to 1Fh: Sampling
data 1 to 32
00
Trigger 1 condition
Set the trigger 1 condition.
0: Trigger 1 setting invalid
1: Fulfilled when passing
through trigger value 1 in
increase direction
2: Fulfilled when passing
through trigger value 1 in
decrease direction
3: Fulfilled with trigger value
1 or higher
4: Fulfilled with trigger value
1 or lower
Trigger 1 code
Set the code of sampling data
referred by trigger 1.
0: Without code
1: With code
00
When Sampling bit information is selected
Trigger 1 sampling bit
information number
Set the number of the sampling
bit information referred by
trigger 1 in hexadecimal.
Example: 00h to 0Fh: sampling
data 1 to 16
00
Trigger 1 condition
Set the trigger 1 condition.
0: Trigger 1 setting invalid
1: Fulfilled by leading edge of bit
2: Fulfilled by trailing edge of
bit
3: Fulfilled while bit is on
4: Fulfilled while bit is off
010
0011 Sampling trigger 2
setting
00000000h 00000000h
to 10041F01h
Same as the sampling trigger 1 setting.
0012 Sampling trigger 3
setting
00000000h 00000000h
to 10041F01h
Same as the sampling trigger 1 setting.
0013 Sampling trigger 4
setting
00000000h 00000000h
to 10041F01h
Same as the sampling trigger 1 setting.
0014 Sampling trigger 5
setting
00000000h 00000000h
to 10041F01h
Same as the sampling trigger 1 setting.