Filter
Top Products
Upgrading CMS to the High Availability Option
CentreVu
CMS R3V8 High Availability
Connectivity, Upgrade and Administration
Setting Up CMS on an HA Server 3-30
6. Press enter to accept the default.
The program responds:
7. Enter the number to specify the type of cartridge tape you are using
as the backup device. The program responds:
Enter the default backup device path.
The correct device path will show information similar to the following
example:
8. After you enter the correct device path, the program responds:
9. Enter the number of ACDs to be administered. This number may be
less than the number of ACDs authorized. The program responds:
Select the type of backup device you are using
1) SCSI QIC-150 cartridge tape - 150MB tape
2) 40.0 Gbyte 8mm tape
3) 14.0 Gbyte 8mm tape
4) 5.0 Gbyte 8mm tape
5) SCSI QIC-2.5 cartridge tape - 2.5GB tape
6) SCSI 4-8 SLR cartridge tape - 4GB tape (8GB compressed)
Enter choice (1-6):
Enter the default backup device path:
(default: /dev/rmt/0c)
Mammoth EXB-8900 8mm Helical Scan tape drive:
sense key(0x0)= No Additional Sense
residual= 0 retries= 0
file no= 0 block no= 0
Enter number of ACDs being administered (1-8):
Information for ACD 1
Enter switch name (up to 20 characters):