Filter
Top Products
Upgrading CMS to the High Availability Option
CentreVu
CMS R3V8 High Availability
Connectivity, Upgrade and Administration
Setting Up CMS on an HA Server 3-27
Setting Up the
CMS Application
3
Overview 3
Use the procedures in this section to set up the CMS application.
Prerequisites 3
• Verify that you are logged in as
root.
• CMS must be turned off.
• All file systems must be mounted.
Setup Methods 3
You can set up the CMS feature package using one of two methods:
a.Interactively from a terminal — Using the interactive option,
the program prompts you for the necessary information to
set up the CMS application (for example, system type,
number of agents, trunks, vectors, VDNs, and so on).
To set up the CMS application using this option, see “Setting Up
CMS Interactively from a Terminal” in this chapter.
b.
UNIX
*
System flat file — Using the flat file option, you edit a
UNIX
System flat file containing the necessary information
(for example, system type, number of agents, trunks,
vectors, VDNs, and so on) to set up the CMS application.
When you execute the program, it runs in the background
and uses the
UNIX
System flat file data to set up the
CMS
application. To set up the CMS application using this
option, see “Setting Up CMS Using a UNIX Flat File
” in this
chapter.
*
UNIX
is a registered trademark in the United States and other countries, licensed exclusively through X/Open
Company Limited.