Filter
Top Products
Upgrading CMS to the High Availability Option
CentreVu
CMS R3V8 High Availability
Connectivity, Upgrade and Administration
Performing a CMSADM Backup 3-9
3. Enter a tape drive selection from the displayed list. The program
responds:
Note:
If only one tape drive is available, the output shown above
is not displayed.
4. Press Enter. The backup process begins. If more than one tape is
required, the program displays the following message:
If you receive the message displayed above, insert the next tape
and allow it to rewind. When it is properly positioned, press Enter.
5. When the backup is completed, the program response varies
according to the number of tapes used for the backup:
a. If the number of tapes required is one, the system responds:
b. If the number of tapes required is more than one, the system
responds:
Please insert the first cartridge tape into
<device name>.
Press ENTER when ready or Del to quit:^?
End of medium on "output".
Please remove the current tape, number it,
insert tape number x, and press Enter
xxxxxxx blocks
Tape Verification
xxxxxxx blocks
WARNING: A CMS Full Maintenance Backup in
addition to this cmsadm backup must be done to
have a complete backup of the system. . . . .
Please label the backup tape(s) with the date
and the current CMS version (r3v8xx.x)
xxxxxxx blocks
Tape Verification
Insert the first tape
Press Return to proceed :