Filter
Top Products
50
SEAT TO FLOORPROCEDURE 7
S
E
A
T
T
O
F
L
O
O
R
CHANGING SEAT TO FLOOR
HEIGHT
Rear Seat to Floor Height
After determining the axle mounting plate placement for
the necessary rear seat to floor height, refer to ADJUST-
ING REAR SEAT HEIGHT in PROCEDURE 3 of this
manual.
NOTE: The following rear seat to floor heights shown
are the most common rear seat to floor heights avail-
able.
Front Seat to Floor Height
POSITIONING CASTER HEADTUBES ON
THE WHEELCHAIR FRAME.
The following caster headtube positions apply to any
size caster. Caster headtube position on the wheel-
chair frame apply to caster headtubes mounted in
ANY of the following positions: Inside/outside of the
wheelchair frame or leading/trailing.
Refer to REPOSITIONING CASTER HEADTUBES
ON WHEELCHAIR FRAME in PROCEDURE 5 of
this manual for more information on mounting the front
casters on the inside/outside of the wheelchair frame
and leading/trailing positions.
After determining front caster headtube position and
front seat to floor height desired, refer to REPOSITION-
ING CASTER HEADTUBES ON WHEELCHAIR
FRAME in PROCEDURE 5 of this manual to reposi-
tion the caster headtube on the wheelchair frame.
POSITIONING FRONT CASTER ON THE
FORK.
The following caster positions apply to any of the caster
sizes.
After determining caster size and positioning, refer to
REPLACING/REPOSITIONING/INSTALLING
FRONT CASTER ASSEMBLIES in PROCEDURE
5 of this manual to reposition the caster on the fork.
After determining fork size, refer to INSTALLING/RE-
PLACING FRONT CASTER FORKS in PROCE-
DURE 5 of this manual to replace front forks if neces-
sary.
NOTE: The following front seat to floor heights shown
are the most common front seat to floor heights avail-
able.