Filter
Top Products
SECTION 6—SEAT ADJUSTMENTS
2G Tarsys®Powered Seating System 74 Part No 1114842
4. Reinstall socket screw and locknut that secure the adjustment slide to leg support
tube. Tighten securely.
5. Repeat STEPS 1-4 for the opposite leg support tube.
Replacing Leg Support Tubes
1. Remove the locknut and spacer that secure the existing leg support tube to the
connecting bracket.
2. Remove existing leg support from seating system.
3. Position the spacer and new leg support on the connecting bracket.
4. Install the locknut and tighten securely.
5. Adjust the leg support tube for the desired seat depth. Refer to Adjusting Leg Support
Tubes on page 73.
FIGURE 6.16 Adjusting/Replacing Leg Support Tubes
SEAT DEPTH LEG SUPPORT TUBE MOUNTING POSITION
ADJUSTMENT SLIDE
16 inches Short
17 inches Short
18 inches Short
19 inches Short
20 inches Long
21 inches Long
22 inches Long
Socket Bolt
Connecting Bracket
(Under Seat Pan)
Leg Support Tube
Locknuts
Spacers
Locknuts
Adjustment
Slide
18 inches
16 inche
s
19 inches
17 inches
DO NOT use these holes
22 inches
20 inches
21 inches
DO NOT use these holes