Filter
Top Products
SECTION 5—INTERFACE HARDWARE
Part No 1114842 29 2G Tarsys®Powered Seating System
TABLE 4 - 2GR Systems WITH Center Mount Footrests AND
Ventilator-Ready Battery Tray
SEAT
DEPTH
MOUNTING POSITION
16-INCH
NOTE: Torque the hardware as listed below:
• Hex screws or socket screws (securing the rear pivot): 75 in-lbs ± 20%.
• Hex screws (securing the front pivot assembly and front of seat bracket) and shoulder
screw (securing the tilt actuator): 13 ft-lbs ± 20%.
Hex Screw
Rear Pivot
Assembly
Spacer Bar
Seat Bracket
Lower Interface
Bracket
Washer
Locknut
DO NOT Remove -
Exploded for Clarity
Locknuts
Hex Screws
Front Pivot Assembly