SECTION 15—WIRING AND CABLES
2G Tarsys®Powered Seating System 162 Part No 1114842
FIGURE 15.6 4-Way Toggle Switch Cable
3. Tie-wrap the auxiliary power connector/potentiometer cable, actuator cable and MK
5
Controller (5-pin connector) cable from the TRCM or TAC as shown in FIGURE 15.7.
NOTE: The accessory cable (9-pin sub D) does not need to be tie-wrapped with the other cables.
4. Connect the accessory cable to the 4-way switch cable.
FIGURE 15.7 4-Way Switch, TRCM and/or TAC Cables
Tie-Wraps
4-Way Toggle Switch Cable
TRCM Controller
Bracket
TAC or TRCM Controller
Accessory Cable
(9-Pin Sub D Cable)
Tie-Wraps
Auxiliary Power
Connector/Potentiometer
Cable
Actuator
Cable
MK
5
(5-pin
Connector) Cable