Filter
Top Products
0611 RM500SL User’s Guide Version 2.8 Page 26
6.2 Internal printer paper loading
FastFacts 6.2: Internal printer paper loading
On-screen instructions on paper replacement are provided if you try to print to the
internal printer when it is out of paper or when the paper lever has been raised.
To load a new roll of paper:
1 Lift the printer head using the small black lever to the left of the printer.
2 Press the <Print> key for on-screen instructions.
3 Remove the empty spool from the paper tray and any remaining paper from the
printer.
4 Hold a new roll in front of the paper tray
with paper feeding from the top of roll.
5 Insert the paper’s leading edge into the
lower slot at rear of tray.
6 Feed the paper by highlighting the on-
screen ‘Paper Feed’ button and pressing
<PICK>.
7 Advance the paper until it comes out of
the upper slot.
8 Place the roll in the paper tray and advance another 10” (25 cm) of paper.
9 Lower the printer head using the small black lever. Press <Continue> to print
or <Cancel> to cancel the print job.
If nothing shows on the paper when you press <Print> and the paper is coming out
–check that the glossy side is up as it comes out of the printer.
Thermal paper may darken if stored for prolonged periods at elevated
temperatures and lose contrast if subjected to light. Keep long-term supplies and
printouts in a cool dry place out of direct light.