Filter
Top Products
0611 RM500SL User’s Guide Version 2.8 Page 20
3.8 Software updating
FastFacts 3.8: Software updating
4 General Setup
4.1 Section overview
FastFacts 4.1: General setup
4.2 Date and time setup
FastFacts 4.2: Date and time setup
To set the date and time that appears on printouts and calibration screens:
1) Press <Setup>, then highlight and <PICK> [Date & Time] on the Setup poster.
2) To change the date, highlight and <PICK> the month window to display a drop-
down list of months.
3) Highlight and <PICK> the desired month on the list.
4) Repeat the previous step to change the date, year and time in the appropriate
windows.
5) When the new date and time information has been set, press <Continue> to
exit.
Software updates, along with a new User’s Guide, are shipped on a CD-ROM. The
software must be transferred to the USB flash drive in the RM500SL in order to be
used. This transfer requires a PC with a CD-ROM drive and a USB port. To
update the RM500SL software:
1) Refer to 3.7: Program memory removal and replacement and remove the USB
flash drive from the RM500SL.
2) Insert the software update CD-ROM into the CD-ROM drive on your PC.
3) Double-click on My Computer, then double-click on the CD-ROM drive.
4) Double-click on rm500sl_update.exe and follow instructions to complete the
update.
5) Remove the USB memory stick from the PC.
6) Refer to 3.7: Program memory removal and replacement and install the USB
flash drive in the RM500SL.
See 1.3: Electronic user’s guide for help in accessing the new User’s Guide.
This section covers the following topics:
4.2: Date and time setup
4.3: Display settings
4.4: Saving test setup