Furuno BR-1000 Medical Alarms User Manual


 
4. ADMINISTRATOR MENU (Initial Settings)
4-4
4.2.1 Harbour mode
Use this mode when you enter a harbor. The bridge alarm system is OFF in this mode.
The BRIDGE ALARM box is gray and the Bridge Panel continues to monitor the equip-
ment. If a bridge alarm is generated, the pop-up display appears on the Bridge Panel,
but the Bridge Panel and Timer Reset Panel do not release the audible alarm. Alarms
are not sent to the Cabin Panels.
The display shown below appears when you change the operating mode to the har-
bour mode.
The BRIDGE ALARM and WATCH ALARM boxes are gray. A gray box indicates
that the related function is OFF. HARBOUR in the MODE box is red.
The buzzer sounds. Press the BUZ STOP and ACK keys. HARBOUR then is col-
ored yellow.
WATCH
ALARM
MODE
HARBOUR
BACK-UP
C/OFFICER
BRIDGE
ALARM
BRIDGE ALARM SYSTEM BR-1000
NO ALARM
TIME INTERVAL
3 MIN
Grayed out
(Function OFF)
Red
WATCH
ALARM
MODE
HARBOUR
BACK-UP
C/OFFICER
BRIDGE
ALARM
BRIDGE ALARM SYSTEM BR-1000
NO ALARM
TIME INTERVAL
3 MIN
Yellow