3-1
3. TIMER RESET PANEL,
CABIN PANEL
3.1 Timer Reset Panel
The Timer Reset Panel is installed on the bridge, and the Watertight Timer Reset Pan-
el is installed on the wing. A total of four can be installed.
When the bridge alarm is given
When this system receives an alarm from an external equipment, both the Bridge Pan-
el and the Timer Reset Panel(s) give audible and visual alarms. The BRIDGE ALARM
button on the Timer Reset Panel flashes (in red) and the audible alarm sounds.
The Timer Reset Panel cannot stop the buzzer or acknowledge an alarm.
When the watch safety alarm is given
If the WATCH/RESET button is pressed within the selected time interval, the watch
timer is reset. If operation is not confirmed within the selected time interval, the
WATCH/RESET button flashes (in yellow) and the buzzer sounds. This operation is
different between the IMO and DNV modes.
• IMO mode
1) The WATCH/RESET button flashes (in yellow) every second for 15 seconds af-
ter the selected time interval ends.
2) The WATCH/RESET button flashes (in yellow) an additional 15 seconds after
the selected time interval ends, accompanied by a 15-second audible alarm.
TIMER RESET PANEL WATERTIGHT TIMER RESET PANEL