Filter
Top Products
4-1
4. ADMINISTRATOR MENU
(Initial Settings)
The initial settings set the equipment according to the requirements of your ship. Only
the administrator of the system can enter the initial settings. All initial settings are en-
tered from the Bridge Panel, on the Administrator menu.
The following occurs within the system during the input of initial settings.
• The system continues to monitor the bridge and watch safety alarms, but alarms are
not generated.
• If an alarm is active, you can open the menu after you acknowledge the alarm with
the BUZ STOP and ACK keys.
• After the menu is closed, the last-used operation modes for the bridge alarm and
watch safety alarm are restored. (If a device generates an alarm while the menu is
open, the bridge alarms start from the 1st stage after the menu is closed.)
If a device gives an alarm while the menu is open, the timer is reset when the menu is
closed. (Alarms are not forwarded when the menu is closed.)
4.1 How to Use the Administrator Menu
The menu is closed if you do not operate a control in 60 seconds.
1. Press the MENU key. The message “Enter Password” appears.
WATCH
ALARM
MODE
ONEMAN
BACK-UP
C/OFFICER
BRIDGE
ALARM
BRIDGE ALARM SYSTEM BR-1000
NO ALARM
TIME INTERVAL
3 MIN
B
R
I
D
G
E
A
L
A
R
M
S
Y
S
T
E
M B
R
-
R
R
1
0
0
0
N
O
A
L
A
R
M
Enter Password