Filter
Top Products
3. TIMER RESET PANEL, CABIN PANEL
3-3
3.2 Cabin Panel
The Cabin Panel is installed in all navigation officers’ quarters and in public areas. The
Cabin Panel releases audible and visual alarms when a bridge alarm is given, or the
OOW did not confirm presence on the bridge within the selected time interval in the
watch safety alarm.
3.2.1 DUTY lamp
One-man mode: The DUTY lamp on the Cabin Panel in the quarters of the back-up
navigation officer and public areas is illuminated (in yellow). The illuminated yellow
lamp indicates that a Cabin Panel is in the 2nd stage of an alarm sequence.
Harbour or attended mode: The DUTY lamp is not illuminated because no alarms
are sent to Cabin Panels in the harbour or attended mode. The lamp lights when the
track control system or heading control system goes on in the attended mode.
3.2.2 ALARM lamp
Bridge alarm
One-man mode: The ALARM lamp lights (in red) and the buzzer sounds in the 2nd
and 3rd stage of the bridge alarm sequence.
Harbour or attended mode: No visual or audible alarms are generated in these
modes.
CABIN PANEL