Filter
Top Products
2. BRIDGE PANEL
2-3
2.3 How to Adjust the Brilliance
The system starts with the last-used brilliance setting. Adjust the brilliance as shown
in the procedure below. This procedure adjusts the brilliance in the “no-alarm state”.
1. Press the BRILL key to show the brilliance adjustment window.
2. Press the right arrow on the Cursor pad to increase the brilliance. The maximum
brilliance is “50”.
3. Press the left arrow on the Cursor pad to decrease the brilliance. The minimum
brilliance is “1”.
4. Press the ESC key to close the window.
Alarm and brilliance level
The system increases the brilliance when the bridge alarm or watch alarm is given.
For the bridge alarm, the brilliance is increased by 10, up to a maximum of 50. The
brilliance is kept until the cause for the alarm is removed.
For the watch safety alarm, the brilliance is increased by 10, up to a maximum of 50.
If the alarm is acknowledged at the 1st stage, the previous brilliance is restored. If an
alarm is not acknowledged at the 1st stage (the alarm is then sent to the Cabin Pan-
els), the previous brilliance is restored after the BUZ STOP and ACK keys are
pressed, in that order.
WATCH
ALARM
MODE
ONEMAN
BACK-UP
C/OFFICER
BRIDGE
ALARM
BRIDGE ALARM SYSTEM BR-1000
NO ALARM
TIME INTERVAL
3 MIN
Brilliance
43
1
50
DayNight