Filter
Top Products
Instruction Manual
IM-106-880C, OI
September 2009
2-7
Hazardous Area OCX 8800
Figure 2-5. Installation with Drip Loops
ELECTRICAL
INSTALLATION
All wiring must conform to local and national codes. For reference, factory
wired solenoid power connections are shown in Figure 2-6.
Conduit Drip Loops
Duct Wall
Conduit Drip Loop Conduit Drip Loop
Duct Wall
37020004
Disconnect and lock out power before connecting the unit to the power supply. Failure to
lock out power could result in serious injury or death.
Install all protective equipment covers and safety ground leads after installation. Failure to
install covers and ground leads could result in serious injury or death.