Filter
Top Products
Instruction Manual
IM-106-880C, OI
September 2009
9-23
Hazardous Area OCX 8800
2. Install and tighten eductor (6) in eductor holder (14).
3. Install and tighten elbow (12) on eductor (6). Male port of elbow must
point up and be in line with long axis of eductor.
4. Apply anti-seize compound to the external pipe threads of eductor
holder (14).
5. Install and tighten eductor holder (14) in sensor housing (7). Align
eductor with matchmarks, as shown in Figure 9-18.
Figure 9-18. Eductor Alignment
Matchmarks
37390036
Eductor Flat
Matchmark
Straightedge