Filter
Top Products
Instruction Manual
IM-106-880C, OI
September 2009
Hazardous Area OCX 8800
1-14
Table 1-1. Product Matrix - Hazardous Area OCX 8800
OCX88C O
2
/Combustibles Transmitter - Flameproof
Code Probe Length and Material
00 No Probe or Exhaust Tube
11 18 in. (457 mm) 316 SST up to 1300°F (704°C)
12 3 ft (0.91 m) 316 SST up to 1300°F (704°C)
13 6 ft (1.83 m) 316 SST up to 1300°F (704°C)
14 9 ft (2.7 m) 316 SST up to 1300°F (704°C)
21 18 in. (457 mm) Inconel 600 up to 1832°F (1000°C)
22 3 ft (0.91 m) Inconel 600 up to 1832°F (1000°C)
23 6 ft (1.83 m) Inconel 600 up to 1832°F (1000°C)
24 9 ft (2.7 m) Inconel 600 up to 1832°F (1000°C)
31 18 in. (457 mm) Ceramic up to 2600°F (1427°C)
32 3 ft (0.91 m) Ceramic up to 2600°F (1427°C)
Code Probe Mounting Assembly
10 (ANSI 2 in. 150 lb) 6" dia. flange, 4.75" BC with 4 x 0.75" dia. holes - Standard O2 Cell
11 (ANSI 2 in. 150 lb) 6" dia. flange, 4.75" BC with 4 x 0.75" dia. holes - High Sulfur O2 Cell
20 (DIN) 185 mm dia. flange, 145 mm BC with 4 x 18 mm dia. holes - Standard O2 Cell
21 (DIN) 185 mm dia. flange, 145 mm BC with 4 x 18 mm dia. holes - High Sulfur O2 Cell
Code Mounting Hardware - Stack Side
0 No Adapter Plate (“0” must be chosen under “Mounting Adapter - Probe Side” below)
1 New Installation - Square weld plate with studs
2 Model 218/240 Mounting Plate (with Model 218/240 Shield Removed)
3 Existing Model 218/240 Support Shield
4 Competitor’s Mount
(1)
5 Model 132 Adapter Plate
Code Mounting Hardware - Probe Side
0 No Adapter Plate
1 Probe Only (ANSI)
4 Probe Only (DIN)
Code Electronics Housing - NEMA 4X, IP66 HART Communications
H1 HART Communications - Basic Unit
H2 HART Communications - Local Operator Interface
H3 HART Communications - Calibration Solenoids
H4 HART Communications - Local Operator Interface and Calibration Solenoids
F1 Fieldbus Communications - Basic Unit
F2 Fieldbus Communications - Local Operator Interface
F3 Fieldbus Communications - Calibration Solenoids
F4 Fieldbus Communications - Local Operator Interface and Calibration Solenoids
Code Electronics Mounting
01 Integral to Sensor Housing Electronics
02 Split Architecture with no cable
OCX88C 11 10 1 1 H3 01 Example