Filter
Top Products
Instruction Manual
IM-106-880C, OI
September 2009
7-19
Hazardous Area OCX 8800
Sensor Housing Type
Table 7-9. Sensor Housing
Enumerations
Cal Results
Table 7-10. Cal Results Bit
Enumerations
Calibration Verify Status
During a running calibration verify procedure, the states below reflect the
current step that the calibration verify is running in.
Table 7-11. Calibration Verify
State Values
Calibration Verify Step Control
During a calibration, the VERIFY_STATE_ STEP command /parameters
control the calibration verify procedure.
Table 7-12. Calibration Verify
Step Values
SENSOR_HOUSING_TYPE Description
TYPE 1
TYPE 2
TYPE 3
CAL_RESULTS Description
O2 Slope Error
O2 Constant Error
O2 Tolerance Check Failed
CO Slope Error
O2 Constant Error
CO Tolerance Check Failed
CO Slope Warning
VERIFY_STATE Description
Idle
Flow High O2 Gas
Flow Low O2 Gas
Flow High COe Gas
Purge Gas
Done
VERIFY_STATE_STEP Description
Start Flow High O2 Gas
Start Flow Low O2 Gas
Start Flow High COe Gas
Purge Gas
No Effect