Filter
Top Products
8
3 Server and Client System Requirements
Table 2 lists minimum server requirements for Service Monitor. Table 3 lists minimum client
requirements for Service Monitor. Table 4 lists browser requirements for Service Monitor.
Note The minimum server requirements in Table 2 might not be sufficient for monitoring a high
volume of calls. For more information, see Release Notes for
Cisco Unified Service Monitor 2.0.
Table 2 Minimum Server Requirements
Component Minimum Requirement
Hardware • Server platform with Pentium IV processor, 2.0 GHz or
greater
• Color monitor with video card capable of 256 colors or more
• CD-ROM drive
Software for Windows Windows Server 2003 Service Pack 1, Standard and Enterprise
editions
Note It is recommended that Service Monitor not share a
platform with other I/O or disk-intensive applications.
Note Configure the server to use Network Time Protocol
(NTP) to synchronize with the time server that is used by
Cisco Unified CallManagers in your network. See NTP
Configuration Notes, page 10.
Available memory (RAM) 2 GB
Available disk space • 60 GB minimum
• Virtual memory: 4 GB
• NTFS file system
1
required.
1. Install Service Monitor on an NTFS file system. Do not install Service Monitor on a FAT file system. To verify the
file system, open My Computer on the Windows desktop, right-click the drive and select Properties from the popup
menu. The file system field appears in the General tab of the Properties dialog box.