Filter
Top Products
Settings and Memory
44
Chapter 3
A three-tone beep sounds when OFF is first
displayed. Then it will flash silently until
the meter turns off.
Exiting Set-up Mode
You may exit set-up mode at any time by
pressing the blue power button and holding
it down to turn off the meter.
Meter Memory
The SureStep Meter is pre-set to
automatically display the last test result
when the meter is turned on. The meter
stores the 10 most recent blood glucose and
control solution test results in its memory.
When the memory is full, the oldest test
result is dropped as the newest is added.
Using the Meter for the First Time
Each time you turn on the meter, check that
all symbol segments appear on the display
(see “Display Symbols” on page 4). The first
time you turn on the meter, the following
SSHosp.book Page 44 Thursday, November 14, 2002 3:44 PM