Filter
Top Products
Operation
24
Chapter 2
▲ CAUTION
For accurate results, the code number on the
meter must match the code number on the
test strip bottle.
3
Apply a drop of control solution to the
test strip as follows:
▲ CAUTION
Applying too much or too little control
solution may cause out-of-range results.
• Gently shake the control solution vial.
• Touch a drop of control solution to the
center of the pink test square.
If the white pad becomes completely
saturated, you have applied too much
control solution. Repeat the application
with a new test strip.
SSHosp.book Page 24 Thursday, November 14, 2002 3:44 PM