Filter
Top Products
Operation
23
Performing a Quality Control Test
1
Turn on the meter. Check the display and
make sure that all symbol segments
appear (see “Display Symbols” on page 4).
2
Check the Code.
When you turn on the meter, the last result
appears (if this option is selected), followed
by the code number. If the code on the
meter does not match the code on the test
strip bottle, press the green C button until
the codes match.
ITY
ITY
Make sure code numbers match.
C Button
SSHosp.book Page 23 Thursday, November 14, 2002 3:44 PM