Filter
Top Products
Operation
17
CHAPTER 2
Operation
Coding the Meter
The SureStep Meter is calibrated at the
factory. Although an internal verification is
performed each time the meter is turned on,
a system calibration (meter and test strip) is
necessary. This is achieved at the start of each
test when you enter the code number for the
current bottle of test strips.
Each time you test or when you open a new
bottle of test strips, check that the code
number on the meter matches the code
number on the test strip bottle. If the meter
code does not match the code on the test
strip bottle, change the meter code.
SSHosp.book Page 17 Thursday, November 14, 2002 3:44 PM